DecounionXL - Fixing Emulsion

Decounion XL Fixing Emulsion

Decounion XL is a high-performance, solvent-free fixing emulsion designed to prepare dusty, absorbent and unstable substrates before applying cork coatings, paints or decorative finishes.

It penetrates deeply into the surface, helps bind loose particles and improves adhesion for the next coating layer. Suitable for both interior and exterior use, Decounion XL is a practical primer for professional renovation, façade preparation, Spray Cork application and general coating work.

Why choose Decounion XL?

Correct surface preparation is essential for a durable finish. If the substrate is dusty, absorbent or weak, even a high-quality coating may not bond properly.

Decounion XL helps stabilise the surface, reduce dusting and create a stronger base for subsequent coatings. It can also be used undiluted where additional moisture resistance and surface protection are required.

Key Benefits

• High-performance fixing emulsion and primer.
• Solvent-free and low odour formula.
• Deep penetration into absorbent and dusty substrates.
• Improves adhesion of cork coatings, paints and decorative finishes.
• Helps reduce surface dusting.
• Enhances moisture resistance.
• Suitable for interior and exterior use.
• Can be applied by roller, brush or airless spray.

Suitable For

• Spray Cork surface preparation.
• Façade renovation and external wall preparation.
• Dusty or absorbent substrates.
• Powdery or weak mineral surfaces.
• Concrete, render, plaster and masonry surfaces.
• Preparation before paint or decorative coatings.
• Interior and exterior priming work.
• Additional protection in areas exposed to demanding weather conditions.

Coverage and Mixing Ratios

Technical Specifications

• Product: Decounion XL
• Type: Fixing emulsion and primer
• Formula: Solvent-free
• Application Area: Interior and exterior
• Application Methods: Roller, brush or airless spray
• Drying Time: approx. 4 to 6 hours under normal conditions
• Packaging: 12kg bucket

Application Instructions

1. Ensure the substrate is clean, dry, stable and free from grease, loose material or contamination.
2. Remove loose dust, flaking paint and unstable surface material before application.
3. Dilute Decounion XL according to the surface condition and intended use.
4. Apply evenly using a roller, brush or airless spray.
5. Allow the primer to dry completely before applying Spray Cork, paint or another topcoat.
6. Typical drying time is approximately 4 to 6 hours under normal conditions.

Important Application Notes

• Consumption may vary depending on surface porosity, texture and application method.
• Very absorbent or unstable substrates may require additional preparation.
• Do not apply to wet, frozen or contaminated surfaces.
• For exterior use, avoid application during rain, frost, strong wind or unsuitable weather conditions.
• Always test on a small area before full application, especially on unusual or previously coated surfaces.

Professional Primer for Spray Cork and Coating Systems

Decounion XL is a reliable preparation product for contractors who need better adhesion, reduced surface dusting and improved moisture resistance before applying Spray Cork or other coating systems.

Use Decounion XL to create a stronger, cleaner and more reliable base for your next coating project.