Decoproyec - Spray Cork

Decoproyec Spray Cork Coating

Decoproyec Spray Cork is an innovative spray-applied coating made with natural cork granules and an acrylic binder. It is designed for interior and exterior use, providing a flexible, breathable and decorative textured finish for a wide range of surfaces.

This coating is suitable for façades, roofs, exterior walls, sheds, commercial buildings, selected interior surfaces and renovation projects where long-term protection, surface comfort and a modern finish are required.

Why choose Decoproyec Spray Cork?

Spray Cork is more than a standard paint. It creates a thicker, textured and flexible coating that helps protect surfaces from weather exposure while allowing water vapour to escape. Its natural cork content can also help improve thermal comfort and reduce noise on suitable surfaces.

It is a practical choice for homeowners, contractors, installers and businesses looking for a durable and environmentally conscious coating system.

Key Benefits

• Made with natural cork granules.
• Flexible and breathable coating system.
• Suitable for interior and exterior applications.
• Helps improve thermal comfort on treated surfaces.
• Can help reduce the cold surface effect and thermal bridging.
• Supports sound-dampening benefits, especially on metal surfaces.
• Weather-resistant finish for façades, roofs and external walls.
• Helps protect surfaces from moisture and everyday weather exposure.
• Decorative textured finish available in multiple colours.
• Water-based system with low odour during application.

Suitable For

• Façade renovation.
• Exterior wall coating.
• Roof coating and protection.
• Metal cladding and sheeted surfaces.
• Sheds, garages and garden buildings.
• Commercial and industrial buildings.
• Farm buildings and workshops.
• Selected interior walls and ceilings.
• Acoustic comfort improvement on suitable surfaces.
• Renovation of older buildings and external finishes.

Applications

• Renovation and protection of roofs and façades.
• Coating of uninsulated or cold external walls.
• Decorative interior finishes on selected surfaces.
• Bathrooms, cold walls, ceilings and columns where suitable.
• Noise reduction on metal roofs, sheds and cladding.
• Surface protection for residential, commercial and agricultural buildings.

Technical Specifications

• Product: Decoproyec Spray Cork
• Type: Spray-applied cork coating
• Composition: Natural cork granules in acrylic binder
• Grain Size: approx. 0.5 to 1mm
• Packaging: 12kg bucket
• Coverage: approx. 6m² per 12kg bucket
• Consumption: approx. 2kg/m² applied in 3 coats
• Recommended Coats: 3 coats
• Drying Time: approx. 4 to 6 hours per coat, depending on conditions
• Application Method: Spray application
• Recommended Nozzle: 6mm for standard texture
• Recommended Pressure: approx. 4 to 4.5 bar for standard texture
• Fine Texture Setup: 5mm nozzle at approx. 5 bar, depending on material and equipment

Application Instructions

1. Ensure the substrate is clean, dry, stable and free from dust, grease, loose material or contamination.
2. Repair cracks, holes, loose render or damaged areas before application.
3. Prime the surface where required, depending on substrate type and condition.
4. Mix the product thoroughly before use to ensure even distribution of cork granules.
5. Apply three even coats using suitable spray equipment.
6. Allow approximately 4 to 6 hours drying time between coats, depending on temperature, humidity and ventilation.
7. Clean spray equipment with water immediately after use.

Important Application Notes

• Do not apply to wet, frozen, unstable or contaminated surfaces.
• Do not apply during rain, frost, strong wind or unsuitable weather conditions.
• Surface preparation is essential for proper adhesion and long-term performance.
• Primer may be required on metal, highly absorbent, dusty, unstable or unusual substrates.
• Coverage may vary depending on surface texture, porosity, application thickness and spraying technique.
• Drying time may vary depending on temperature, humidity, airflow and coat thickness.
• Always test on a small area before full application, especially on unusual or previously coated surfaces.

Professional Cork-Based Coating System

Decoproyec Spray Cork is a versatile coating system for contractors, installers and property owners who want a durable, breathable and textured finish for roofs, façades, walls and other suitable surfaces.

Choose Decoproyec Spray Cork for long-term surface protection, improved comfort and a modern cork-based finish in one professional coating system.